TINMO F3 MT6261 Flash File 1000% Tested CM2 Read File Paid Without Password BY ROBIN TELECOM BD 678

Wait for phone...

Phone found! [ 30 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6261

BB_CPU_HW : CB01

BB_CPU_SW : 0001

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6261_S0000

BB_CPU_SN : 12C90DADAA8C1C8A4182985E3B3EBE49

BROM Protocol Version : 05

Setting...

Setting done , result code 0x000E

BROM stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32

[0] : FLASH_DIE : 00C8 0060 0016 0000 

[0] : FLASH_LEN : 0x00400000

SDS_INFO : 0x003FE000 , 0x00002000

INT_RAM : 0x0000D000

EXT_RAM : 0x00400000

Reading Flash Content now ... 

Read Flash now

Read Ok , 4194304 bytes read

Check and collect compile info

File_Info   : VITA61A_BT_11C_PCB01_gprs_MT6261_S00.C710_TINMO_F3_V03_2018_12_25.bin

FileVersion : C710_TINMO_F3_V03_2018_12_25

[ScatCFG] : MT6261 / C710_TINMO_F3_V03_2018_12_25 / NOR , SF

Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\VITA61A_BT_11C_PCB01_gprs_MT6261_S00\

Done!

Elapsed: 00:00:22

Reconnect Power/Cable!

Winster W100 Spd6531A Flash File 1000% Tested Paid Without Password BY ROBIN TELECOM BD 678

Sync...

Sending boot ... 

Boot Sent , starting...

Boot Ver : Spreadtrum Boot Block version 1.2

Boot Ok

CPU ID : 6531A , FDLStat : 0100

[0] Flash DIE : 00EF 0040 0016 0000

[0] Flash VEN : Winbond , W25Q32

[0] Flash CAP : 00400000

Read Flash Content

Read Ok , collect info

MT6580__Winstar__WS113_Tiger FLASH FILE Hang on Logo Fixed Problem Solve 100% Tested no WITHOUT PASSWORD BY ROBIN TELECOM BD 678

Hang on Logo Fixed Problem Solve 100% Tested 

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 90014A4834473164048600A2A5A5904B

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x90 , OEM : 014A

[eMMC] : FLASH_INF : [HYNIX] , d1G4

[eMMC] : FLASH_CID : 90014A4834473164048600A2A5A5904B

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000

[eMMC] : FLASH_LEN : 0x00000000E7000000

[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]

DEV RID    : 0x91662A17E3ACE416EF551C81E601FAC2

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Winstar

ProdName  : WS113 Tiger

ProdModel : WS113 Tiger

Device    : WS113 Tiger

AndroidVer: 5.1

CU_SWVer  : V1.1.4

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

[Read Ok] : preloader_hct6580_weg_a_l.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1330 MiB

Scatter saved to : C:\Users\Ratul\Desktop\RED FILE\MT6580__Winstar__WS113_Tiger__WS113_Tiger__5.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55\

All done!

Done!

Elapsed: 00:10:50

Reconnect Power/Cable!

আসসালামু আলাইকুম, আপনারা যারা Winstar__WS113_Tiger মোবাইল ফ্ল্যাশ করে সেট ডেড বা HANG LOGO LCD White করে ফেলছেন ,আমার এই ফাইল দিয়ে ফ্ল্যাশ করেন আপনার ফোন ১০০% ঠিক হয়ে যাবে ইনশাআল্লাহ্‌ । 

TECNO_W5_Lite MT6580 FLASH FILE 100% Tested CM2 Read File Paid Without Password BY ROBIN TELECOM BD 678

Hang on Logo Fixed Problem Solve 100% Tested

  Before Flash

You have to consider some important factors before flashing. Cause They ensure proper installation.
Check that your device charge is at least 50%. If it is below 50%, do not start the Flashing process.
Check your device model, chipset with the downloaded firmware’s twice.
You must make a backup of your important files as well as contacts and messages, as there is a chance to loss them during flashing.

***************ROBIN TELECOM BD 678********************

Dead Phone Solution ( softwer )
Flash After LCD White/Black Problem
Hang Logo Problem solved
Google account Remove/FRP Unlock
Camera Error Problem
Unfortunately apps stop android
Apps virus remove

আসসালামু আলাইকুম, আপনারা যারা TECNO_W5_Lite মোবাইল ফ্ল্যাশ করে সেট ডেড বা HANG LOGO LCD White করে ফেলছেন ,আমার এই ফাইল দিয়ে ফ্ল্যাশ করেন আপনার ফোন ১০০% ঠিক হয়ে যাবে ইনশাআল্লাহ্‌ । 

Quantum_Q-Titano_M1_FLASH FILE Hang on Logo Fixed Problem Solve 100% Tested no WITHOUT PASSWORD BY ROBIN TELECOM BD 678

Hang on Logo Fixed Problem Solve 100% Tested

  Before Flash

You have to consider some important factors before flashing. Cause They ensure proper installation.
Check that your device charge is at least 50%. If it is below 50%, do not start the Flashing process.
Check your device model, chipset with the downloaded firmware’s twice.
You must make a backup of your important files as well as contacts and messages, as there is a chance to loss them during flashing.

***************ROBIN TELECOM BD 678********************

Dead Phone Solution ( softwer )
Flash After LCD White/Black Problem
Hang Logo Problem solved
Google account Remove/FRP Unlock
Camera Error Problem
Unfortunately apps stop android
Apps virus remove

আসসালামু আলাইকুম, আপনারা যারা Quantum_Q-Titano_M1 মোবাইল ফ্ল্যাশ করে সেট ডেড বা HANG LOGO LCD White করে ফেলছেন ,আমার এই ফাইল দিয়ে ফ্ল্যাশ করেন আপনার ফোন ১০০% ঠিক হয়ে যাবে ইনশাআল্লাহ্‌ । 

Innjoo i2 MT6592 FLASH FILE Hang on Logo Fixed Problem Solve 100% Tested no WITHOUT PASSWORD BY ROBIN TELECOM BD 678

Hang on Logo Fixed Problem Solve 100% Tested

  Before Flash

You have to consider some important factors before flashing. Cause They ensure proper installation.
Check that your device charge is at least 50%. If it is below 50%, do not start the Flashing process.
Check your device model, chipset with the downloaded firmware’s twice.
You must make a backup of your important files as well as contacts and messages, as there is a chance to loss them during flashing.

***************ROBIN  TELECOM BD 678********************

Dead Phone Solution ( softwer )
Flash After LCD White/Black Problem
Hang Logo Problem solved
Google account Remove/FRP Unlock
Camera Error Problem
Unfortunately apps stop android
Apps virus remove

Gretel-E1 MT6572 Flash File Hang on Logo Fixed Problem Solve 100% Tested no without Password BY ROBIN TELECOM BD 678

MT6572__V19__Gretel-E1__Gretel-E1__4.4.2__ALPS.KK1.MP7.V1

  Before Flash

You have to consider some important factors before flashing. Cause They ensure proper installation.
Check that your device charge is at least 50%. If it is below 50%, do not start the Flashing process.
Check your device model, chipset with the downloaded firmware’s twice.
You must make a backup of your important files as well as contacts and messages, as there is a chance to loss them during flashing.

***************ROBIN TELECOM BD 678********************

Dead Phone Solution ( softwer )
Flash After LCD White/Black Problem
Hang Logo Problem solved
Google account Remove/FRP Unlock
Camera Error Problem
Unfortunately apps stop android
Apps virus remove